MEG-WF3/BO
For reshaping steel tubes and stainless steel tubes with outside diameters from 6 to 42 mm. By changing tools, this machine can also be used as a flaring machine for Walterscheid-37° SAE flaring flanges for all diameters to 101.6 mm.

 

WALFORMplus

The innovative solution

WALFORMplus is a positive tube fitting system that consists of just three components.The mechanically reshaped tube end is positively connected by a conventional DIN fitting body and a DIN nut, the only possible leakage path being sealed off by an elastomer ring.One characteristic feature of the new series is the shoulder on the end face of the reshaped tube, which is inserted into the 24° cone of the body. This results in a marked improvement in assembly bahaviour and good protection against excessive tightening.

 

A gain in economy:

• Few parts (reduced material and logistics costs)
• Inexpensive
• Simplest assembly
• No preliminary or follow-up work required

A gain in safety due to positive connection:

• Secure / Pressure-resistant
• Absolutely leak-proof
• Tolerates assembly errors

A gain in easy of assembly:

• Just one separating / sealing point
• Reliable assembly / Clear end of assembly
• Short assembly times, low torque
• Far lower tightening torque compared to all cutting-ring tube fitting systems

 

 

You can get the complete brochure: WALFORMplus as a PDF-file here. (937KB)

 

Electronically controlled reshaping machines guarantee efficient production at high and constant quality - both stationary and locally.

MEG-WF2
For reshaping steel tubes with outside diameters form 6 to 42 mm and stainless steel tubes with outside diameters from 6 to 30 x 3 mm. By changing tools, the MEG-WF2/BO machine can also be used as a flaring machine for Walterscheid-37° SAE flared flanges up to 60.3 mm.